My traeger has had some good moments but it very unreliable. I really do not enjoy cooking with it. I have no confidence in the temp readings and the smoke control. Every time I open the lid the temp drops like 200 degrees. I'll smoke at the "smoke" setting but as soon as I turn it to 225 it spikes to like 300-500 degrees. Wtf? I thought this POS was supposed to be a set it and forget it type smoker. Very unreliable. Temp fluctuates so much and if there is even a slight breeze the temps just go up and down up and down. The pellet feeder is garbage. It will all the sudden just start smoking like crazy because the pellets have jammed into the burner. Completely ridiculous smoker. I use it still but only when I can sit and watch the feeder. The guys comment below is true about the feeder always just using the middle pellets. I always have to check it and push the pellets to the center. Some simple engineering would change this. Never again will I purchase a traeger. There are much better options out there and better price.
Thanks Kevin. I am about to buy both a 5 burner gas grill and a smoker for a new bbq island. Rather than buy both, will one of these higher end pellet grills take the place of a traditional propane grill? I can apply the funds for the gas grill to a higher end pellet if it can really do double duty. It has to be able to cook burgers and dogs and steaks etc. Just like a gas grill though. Thoughts?
To cook food using a pellet grill, put the pellets into a hopper. When you turn it on, the igniting rod will burn pellets in the fire. The motor-driven auger will then supply the fire pot with pellets from the hopper. The ratio that auger delivers pellets to fire pot depends on the settings you control. If you set it at a high temperature for a longer period of time, the auger will keep on feeding the fire pot with pellets. However, if you are slow-cooking and set a low-temperature one, the feeding and delivery of pellets will also slow down.
I have always been a believer: “do what you love and you’ll never work a day in your life”. I’ve been lucky enough to use my professional experience in the meat industry over the past 20 years to create a business where I love to go to work. Smoking Meat Geeks is all about bringing people together that enjoy food as much as I do. We provide a place for everyone to share thoughts, ideas, and recipes; to be a go-to spot for cooking inspiration. Feel free to leave a comment, say hello, or provide any tips. There is no right or wrong input, as long as you’re engaging, you’re a Meat Geek!
Thanks for the quick response and advice. I see a pellet pro hopper assembly is around $250 compared to the Memphis pro at over $2000. I didn’t realize that drafting isn’t important for the sake of temp regulation but what about how the smoke travels from the firebox towards the meat? I also would like to include an element of humidity, is simply putting a pan of water in the cooker or is there a better way?
It doesn’t matter what it is that you’re buying, you want to get the best bang for your buck and not pay more than you have to. We all have this same mentality when it comes to making a purchase. This is why when we see price tags that indicate something is “on sale’, we immediately think we are getting a good deal. But is that really the case? The answer is no. When it comes to buying your new pellet grill “on sale” from a distributor or retailer, it means that they are essentially reducing the markup that you have to pay. Aside from the rare instances where a retailer is selling a product as a loss leader where they are intentionally losing money on a product to get you into the store and buy other more profitable products, you will still be paying more money in the end than what the manufacturer would price the grill at if they were to sell it to you directly.
Most old-timers will tell you that a buildup of soot and grease will improve the taste of your food. This does not prove true, in fact, it’s not good for you and can even be dangerous. At Grills Forever we want your grilling experience to be the best and safe. Therefore, before any cooking session, always clean your grill to optimize its performance and prevent any off-flavors. Check the grease pans or collectors before smoking because the collector could be full and overflow, starting a fire. If there is a grease chute then clean it for sure.
Hey DS – You’re dead on correct re: Grilling vs. Smoking. Most to nearly all Pellet Smokers are used as “smokers” in the truest sense. Louisiana Pellet Smokers boast a direct fire feature for grilling, as do Yoder smokers. However, I’m with you in that a grill is a grill and a smoker is a smoker. GMGs are very popular down here on the FBA circuit. However, most folks do find that they don’t produce the amount of smoke preferred for competition meats (which, in truth is a complaint about many pellet smokers). This is why stick burners and “some” gravity feds get a boost in rep among competition cook teams. That said, I do see folks happily using pellet smokers, and some win with them. One “trick” I see used now and again to boost the smoke output on a pellet smoker is to use one of those smoke tubes… like the A-maze-n Tube Smoker. Thanks for your comment, and for stopping by to read this blog post! – Kevin
My brother said his Traeger blanket saved pellets in cold weather, so after talking to him I decided to order one. Used it for the first time today. The blanket went on easily & fit the grill perfectly. The temps this a.m. was below 0 when the meat started smoking. So far so good! The grill hasn't extinguished itself, a problem we always had when cooking in the cold, the temp of the grill is cooking like it does in the summer, & the meat is smoking beautifully. If you Traeger in cold winters this accessory is a must have!
First things first, this is not post against the Traeger grill/smoker. I love the foods I have experienced from it. This is strictly about the customer service FROM TRAEGER (not amazon) I have received from them. I purchased a grill for my parents right before Xmas. I was happy to get this for them, but upon putting it together we noticed a huge dent in hopper and the under crate all dented in. Box was in perfect condition(Pics below)
Just finished my first smoke on the YS640, ribs and chicken thighs. This machine is amazing. It couldn't be simpler to use. The chicken was the best I have ever tasted. The ATBBQ team was great, with fast shipping and they threw in some extras. I could not be happier and can't wait for years of great food off the YS640. Don't hesitate to buy this cooker or to order from ATBBQ.
Thank you all for a great site and an informative discussion. I am a newbie to smoking and presently have a charcoal grill for when I have more time and a gas grill for a fast meal. Its time to replace my gas grill so I am looking at alternative options. Is a pellet grill overkill, or a timely expedition, if I want to grill a couple steaks or chicken breasts during week nights? I’d also be interested in smoking larger hunks of meat (and ribs!) less often, but am wondering if a pellet grill can cover both? How long does it take a pellet grill to get to temp (e.g. 450°)? With the indirect heat, can you get char marks on your meat? Thanks in advance for the info!
If you have an older smoker and need a lot of physical maintenance like changing the hopper and the digital control, then changing those two parts may not help. These two changes may cost you $200 – $250 and with a rusty hopper, you will continuously lose the smoke you produce. This is not safe for your health, so in this situation, you should definitely opt to get a new pellet smoker grill.
With 341 square inches of cooking space and a digital control board that sets the temperature from 180 to 500 degrees, you’ll be cooking whole meals in this grill, even though it’s the smallest model that Pit Boss makes. It will hold up to a dozen burgers for parties, or a chicken and vegetables for the family dinner. When cooking is done, the porcelain coated grill grates are easy to clean.