I cannot comment on the quality or Function of the Grills as I never received mine. I order a Texas Elite 34 at the Minnesota State Fair on Aug. 23rd for $899 with a few extras and was told this was the lowest price ever (Not True). They did not tell me about the pro series which I found later. They said it would be delivered within 7 days. 2 weeks later no grill so I called customer service just asking on when I would get the grill. They could not find my order and did not believe I ordered one... They said I had to email them my receipt as they could do nothing on the phone.
The argument against bark is that it can cause an inconsistent burn and produce excessive ash. Again, consider a log on a fire. Because they have different compositions, the bark and hardwood burn at different rates and produce different amounts of heat. Furthermore, bark doesn’t burn cleanly, it creates more ash than the hardwood. When that ash builds up, it interferes with your grill’s ability to accurately read the temperature, causing large swings. If too much of that ash builds up in the fire pot, it can cut off the oxygen and snuff out the fire.
Each grill is porcelain coated, like you’d find on professional grills, for exceptional heat transfer and easy wipe cleaning. This attention to excellence is extended over the whole machine, with everything made out of heavy gauge steel and top quality material. The only real let down is the wheels, which are kind of low quality, but they’re real simple to switch out.
Hi Brad! Thanks for your comment. I’d give Grilla Grills a hard look. Their Silverbac model is as solid as they come. The sear box on the Camp Chef is an interesting addition. Given that it’s propane powered, it would be pretty much light, turn and go. So, as you said, low maintenance. Still… with a set of grill grates, you should be able to get a sear at top temps on most pellet grills that would meet your expectations.
Hey Jeff – I think that due to pellet smokers requiring much of the wood pellet for “fuel” leaving a smaller part for the “smoke” means that you want as much of the smoke to stay in the chamber for as long as possible. Just my opinion. I’ve not used charcoal pellets. Those I’ve spoken with who have used them weren’t extremely happy with the results. Regarding the water pan, I feel that pellet smokers don’t typically require water pans. However, you can surely use one and see how your results go.
To sear a steak you need direct radiant heat. I don't care if you can heat the air to 1000°F, it is still indirect heat and that does not deliver as much energy as direct radiant heat. It's physics, but not hard to understand. In short, heat is not the same as temperature. It feels hotter at 80°F if the sun is shining on you than if it is 80°F in the shade. I discuss the concept in more detail in my article on thermodynamics of cooking.
According to Bruce Bjorkman of MAK, his cookers use about 1/2 pound of pellets per hour when set on "Smoke" (about 175°F). At 450°F, the high temp, they burn about 2.3 pounds per hour. This is about the same average as I have experienced on a variety of pellet eaters. The burn rate will vary somewhat depending on the outside air temp, and how much cold meat is loaded in the grill, but cooking load should not have a major impact. Cooking pellets run about $1 per pound depending on the wood flavor, brand, if you get them on sale, and if you have to pay shipping. As a point of comparison, Kingsford briquets list for about $0.75 per pound, but they don't pack the same BTUs because there are fillers. I usually buy 40 pound bags of BBQr's Delight pellets from BigPoppaSmokers.com for $45 and shipping is free to IL. That's $1.13 per pound. That means that if I cook a slab of spareribs for six hours at 225°F I will probably burn about 4 pounds at about $4.50. If I put 8 slabs in there in rib holders, and allocate 1/2 slab per person, my cost for 16 people is about $0.28 each. If I grill a mess of chicken parts at about 325°F for about 1 hour, I will use about 1.5 pounds of pellets for a cost of $1.70.
Pit Boss Wood Pellet Grills are filled by all regular BBQ wood pellets. The computerized control board lights the grill and permits you to set the cooking temperature from 180° to 500°F. Fan constrained convection cooking takes out the requirement for a rotisserie and makes an adaptable situation for grilling, simmering, smoking, braising and preparing. The Pit Boss 340 has 340 sq. in. total cooking surface with porcelain covered cooking grids. With complete structural quality and strength, the Pit Boss 340 is made to last.
The digital controller controls temperatures from 150F to 500F in 5-degree increments; that’s the most precise we’ve found on a pellet grill, and gives you a good, precise burn. There’s also Sense-Mate, a thermal sensor that monitors the smoker’s internal temperature, so you can keep an eye on it remotely on your phone via Wifi, letting you adjust the temperature from the app.
Regarding getting a good draft, this is a common misconception for pellet grills. The burn pot on pellet grills receives oxygen via a fan unit. As such, there’s no need for a draft to get a measured burn in the traditional sense. Most pellet grills lack sufficient insulation / gaskets, etc to prevent smoke from leaking out of the body. So, unless you’re going with the Memphis or something that uses oven style insulation, you don’t really need a chimney at all IMHO.
Cleaning and Maintenance: Any individual who’s taken a stab at cleaning a pellet grill before sees exactly that it is so hard to get all the ash out after use. This unit gives you a less demanding access to the burn pot. It also includes a trap door which permits you to clean the unit without digging through the ashes and oil. Cleaning the unit is by and large significantly less demanding when compared with the normal charcoal grills.
Joe Traeger designed and developed pellet grills back in 1985 and he patented the design one year after. But these didn’t go into full commercial production until 1988. Because of the patented design, Traeger held a monopoly in the pellet grill market for twenty years. But being a small family-run company, they did not diversify and kept supplying their products only to a select network of stores.
Today, all serious players in the pellet smoker market have switched to digital thermostatic controllers that dictate pellet-feed commands based on a temperature sensor inside the cooking box. Just like with the oven in your kitchen, you set the desired cooking temperature, and the heating system kicks on and off to maintain that set point. An LED display shows your set temp, and most models allow you to toggle between set temp and actual temp readings from the internal thermostat. Actual temperatures will fluctuate a bit as the controller switches on and off to hover around your set temp, but many sophisticated touch-pad controllers can maintain tighter tolerances than your indoor oven. Some pellet controllers also have integrated probes that let you monitor the internal temperature of whatever you're smoking. Wireless remote control and monitoring from your smartphone or tablet are also increasingly common. (You can learn more about pellet smokers on AmazingRibs.com.)
Mixing flavored woods with oak offers a couple of advantages, starting with price. Woods like cherry and hickory aren’t nearly as plentiful as oak and therefore cost more, making 100% flavored wood pellet more expensive than those that use a base of oak or alder. By using a blend of oak and cherry, pellet makers can keep prices down—and because oak is fairly neutral the cherry wood smoke flavor still shines through.
Next in our pellet grill review is the Green Mountain Davy Crockett pellet grill. Its small size makes it a portable grill. It weighs 57 pounds and measures 14.5 by 20 by 29.5 inches in dimensions. The Green Mountain pellet grill has 110V or 12V adaptors for 3 power options. It has foldable legs that also function as handles. This pellet grill also features a thermal sensor which monitors the grill temperature called Sense-Mate. One coveted feature on this pellet grill is that is Wi-Fi compatible.
Brad Barrett at Grill Grates makes a fantastic product. Reverse searing 2″ steaks and chops (or thicker) works great on pellet smokers as you can get the internal temp up to 10-15 degrees below your desired finish temp, remove them and loosely wrap / cover in foil, crank up the smoker with the grates on to say, 400 degrees, and then sear off your protein getting great grill marks with little to no sticking at all. Huge fan of Grill Grates.
My wife purchased this cooker for me for Christmas three years ago when I was working on the road. I had been a gas man for years and had converted to charcoal with great success and enjoyment. I built a UDS smoker and was really getting into the slow smoking with better temp control. Then my son ratted on me and told my wife that I had been drooling over a Yoder Pellet Grill. She surprised me to say the least as I would have never bought this unit myself. I've had several cars that cost less than this smoker! Wow. In person, this grill is build by people that love their job. The smoke flavor compared to a Weber kettle is more delicate than harsh. Temperatures are very even across the grill with warmer sides within an inch of the body of the grill. Being able to start it in two minutes and get to cooking in ten is very handy. Being able to run downtown without worrying about the temp is awesome. I've had it get a little lower than where I had set it, but not by more than 15 degrees. It has great reliability in any weather. We live in northern Montana and this thing just does what you want it to do. Great for making jerky, slow smoke, grilling, and baking. Wood fired cookies are one of our favorites. I've smoked cheese on it during the dead of winter at -15 degrees. Bacon...wow. If you have never had slow smoked bacon I feel sorry for you. Don't worry about not liking this unit after the purchase. I've thanked my wife more times than I can remember and I've received just as many compliments back from everyone who has sampled the food. Great job Yoder!
One comment I see a lot in various forums like Pellet Heads Forum is that you want as much efficiency as you can get. As with lump charcoal, this means burning as clean of a cook as you can with as little ash as possible. Different pellet mixes will produce differences in what you get in this area, and the cooker you’re using will dictate this to some degree as well.