Retail pricing for the Traeger Grills Pro Series pellet smokers come in at $799 for the 22 in. and $999 for the 34 in. At this time, they’re available only through approved Traeger retail locations. If you’re in the Central Florida area, Whiskey Bent BBQ Supply in Lakeland, FL is a Platinum Traeger Dealer. Otherwise, you can find a list of approved Traeger dealers via their network locator page.
I spent months checking out Memphis, Fast Eddy, Mak, and Yoder grills. I must say the Yoder is by far the most robust pellet grill of them all. I noticed many reviews with 3 or 4 star ratings for price and I must disagree; fit, finish, build quality, and material robustness of the Yoder was better than the Memphis Pro & Elite...and we all know how expensive the Memphis is.
My husband used my two cast iron dutch ovens to make corned beef, but neglected to wash out the pots afterward. Needless to say, when I discovered the ruination of the years of seasoning destroyed by the salt brine, I wanted to cry. This product is so much better than using vegetable oil or shortening as I have done in the past. It seals the surfaces well and does not leave a sticky residue. Hope it gets back to at least an approximation of the old coating. Only time will tell.
Each of the alternatives to the Traeger Pro we’ve reviewed above is an excellent choice for an affordable pellet smoker. We think the Z Grills Master 700D is worth every penny and competes with the Traeger for even less money. We highly recommend you check it out. It has an even larger grill area, a larger hopper, burns just as consistently, and produces some perfectly smoked and grilled meats.
I bought this grill in May 2018. Had to return it to Ace 9 days later because it wouldn’t keep temp or would go out and fill up with pellets. I had to have the GM of Ace fight for me to get a new grill from Traeger. Once I did the new one seemed to work for about a month. Since then this one does the same thing as far as heat and pellets. I thought this thing was supposed to be a set and forget grill. If I don’t watch the heat it will be 200+ degrees over the set heat or sometimes be at ambient temperature and I have to pull me meat, grill and grease tray out so I can empty the heat pot of all the Unburned pellets. This thing is nothing but trouble. Does it cook great meat? Yes! When it works and you babysit it the whole time. On top of that customer service is about as useless as ** on a boar! They will try and tell you it’s something you’ve done wrong. I will be buying another brand smoker and giving this one to someone who like to deal with troubles.
The best pellet grill smoker has the benefit of being easy to light and easy to use. With a pellet smoker, you put the pellets in the hopper, light the heating unit, and you don’t have to worry about it. Conversely, with a charcoal smoker, you have the struggle to light the charcoal, and then throughout the entire cooking time, you need to check the backup on the unit to make sure that it’s functioning properly.

The SG and ZG are not exactly the same though. Just from the pictures I can see that the bases are different. The SG has L-shaped legs and a bottom shelf while the ZG has square legs that are larger than the DLX legs but no bottom shelf. There were also different specs for many features. I took a picture of the ZG spec sheet at the store and compared it to the SG specs on the website and there are slight differences in capacities. For example ZG 3778 cubic inch - SG 4859, grilling area ZG 776- SG 811, hopper volume ZG 18 lbs - SG 22, ...
Turn it on to "Smoke" mode and use the P settings, or cook mode by selecting a temperature. When you select smoke or a temp setting you start the ignition sequence. The fan, igniter and auger motor turn on. The fan stays on until the smoker is turned off. The auger motor continuously delivers pellets to the red hot igniter rod in the firebox for two minutes under normal conditions. Then the igniter rod shuts off and the pellet fire burns with only the assistance of the auger and the fan.
Eric, I’m sorry for the trouble you’ve had with your Traeger. Not sure this will help, but here is how I make sure I don’t have the problem you had. When I start after a long previous cook or any cook at all really, I vacuum out all the dust and vacuum out the burn pot. Then, I put a handful of pellets into the burnt pot, insert the heat deflector, the drip tray, and grate. I find that this keeps things working well. Sometimes, the burn pot will get too full of ash and this can cause the problems that you had. Give it a try. If it works, please let me know.
The flame broiler uses a digitally controlled burn system. Its Digital Control Center lets you set the temperature ranging from 170F to 600F with ease. The desired temperature is set and maintained through an electric auto-start and fan-forced air mechanism. These, in addition, give that flavorful smoky taste to all of your foods. The auger automatically feeds pellets into the smoker, so you can pretty much let it take care of everything.

If you live in an area where wood furnaces are used (not like down here in FL where a few heat strips will do the trick), you may also be familiar with pellet furnaces. In short, pellets compressed from sawdust and wood shavings fill a hopper and are then fed into a burn pot using an electric auger system. The auger, which is basically a long screw, delivers pellets to the burn pot based on the speed dictated by the unit’s thermostat.

×